The Register Plus: The premier choice for all rooms

The Register Plus

The premier choice for all rooms

[+]image

Available Downloads

Owner's Guide : 351.6 kB
Line Art : 324.9 kB
Hires Tiff : 1.1 MB
Spec Sheet : 120.3 kB

Other Links

Features and Benefits

Thermal Safeguard
- High temperature manual reset: turns off heater if normal operating temperatures are exceeded
Commercial grade steel element
Powder coat paint process eliminates sharp metal edges
Wall can designed for quick installation with mounting legs that minimize measuring time

General Information:
The Register Plus is Cadet's premier fan forced heater line and is often chosen for its similar appearance to central system register vents. Models are offered with both fixed and multi-watt capabilities (multi-watt models factory preset at their maximum wattage). A large squirrel cage blower quietly provides increased airflow allowing for lower surface and air-at-surface temperatures. Cadet recommends a wall-mounted thermostat for optimum performance, or you may prefer the convenience of an optional field mount thermostat kit.

[+]image

Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 120V, 208V, or dual field rated 208V/240V. A 20 gauge wall mounting can with four knockouts shall be provided with each complete heater. The element and blower shall be of unitized construction and shall attach to wall can with a single screw. Elements shall be steel-finned type, with an oversized 25 amp rating at 240V high temperature manual reset limit switch. A tangential cylindrical blower delivering approximately 60 CFM (RM202), and 50 CFM (RM162 and RM151) shall be driven by an impedance protected motor with permanently lubricated, vibration isolated, dust sealed bearings. Metal grill shall be of one piece construction and finished with a powder coat paint system.

Technical Information:
A thermostat is required. For optimum comfort use a Cadet electronic thermostat. Fan heaters and thermostats work best when installed on an inside wall. A double pole, built-in thermostat may be installed in the field. UL requires heater to be placed a minimum distance of 6” (15.2 cm) from adjacent surfaces and 4.5” (11.4 cm) from the floor. Manufacturer recommends installation of 12” from all surfaces. A 3’ (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.

NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.

Ordering Information:
Recommended for elevations under 7500 feet. Complete unit available in white only.

Rough In Dimensions: 12.75"W x 6"H x 4"D
Wall Can Dimensions: 12.625"W x 8.875"H x 4"D
Grill Dimensions: 14"W x 7.375"H