The ideal choice for bathrooms
The RBF Series
The RBF101 is a compact bathroom heater that features a convenient on/off rocker switch control and a fan forced interior from our most popular heater The Com-Pak Plus. The heater is on until manually turned off. The mesh screen attached to the grill breaks up the flow of air, providing a more gentle heat distribution. Factory rated at 1000 watts at 120V, this unit includes heater assembly, grill and grill frame.
Ordering Information:
Recommended for elevations under 10,000 feet. Stainless steel grill attaches with frame.
For new installations, wall can is required.
Features and Benefits
- Primary and Secondary Thermal Safeguards
- Robust, heavy duty high temperature manual power reset
- Over temperature one-time thermal fuse - Nichrome coil element for quick heat
- Stainless steel grill with frame
- Built-in on/off switch
Ordering Information:
Recommended for elevations under 10,000 feet. Stainless steel grill attaches with frame.
For new installations, wall can is required.
Architectural Information:
Fan forced electric air heaters shall be UL Listed and factory rated at 120V. Each complete heater shall be of unitized construction and attach to the wall can with four screws and shall be self-contained and completely separate from the wall mounting can. Element is of nichrome type wire wrapped on mica insulators with a high temperature manual power reset limit switch and an over-temperature thermal back-up. A two stage centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Grill assembly is made up of stamped grill and attached expanded metal screen. Grill trim frame is made of stainless steel.
Technical Information:
For best results use a timer control with the RBF heater. UL requires a minimum clearance of 6” from adjacent vertical surfaces such as walls, shelving, drapes, etc., and 6” from the floor. Manufacturer recommends 12” from finished floor and adjacent surfaces. A 3’ minimum clearance is required for furniture or other objects placed directly in front of heater.
NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.
Rough In Dimensions: 10.25"W x 17"H x 4"D
Wall Can Dimensions: 10.125"W x 18"H x 3.875"D
Grill Dimensions: 12"W x 19"H x .25"D
Click on the part number for more information.
| Part# | Model# | Description | 240V | Watts 120V | 208V | 240V | Amps 120V | 208V |
| 79241 | RBF101 | Heater Assembly, Grill, and Grill Frame | 1000 | 8.33 |
| Part# | Model# | Description | Weight |
| 79243 | RBFC | RBF Wall Can - Flush Mount | 4.5 Lbs |