The Hot One – RCP Series

Maintenance

As needed or every six months, minimum

1. Allow the heater to cool, then disconnect the power cord from power supply. To disconnect heater, turn control to “OFF”, then remove plug from outlet. IMPORTANT: The heater must be unplugged before performing any maintenance.
2. Remove front diffuser grill by removing the 4 screws (1 from each corner).
3. Wash grill with hot soapy water and dry immediately, or use air compressor to blow debris from grill louvers.
4. While holding fan (to avoid damage or bending), use an air compressor, hair dryer or vacuum on blow cycle to blow debris through the outer cabinet louvers and finned elements (Do not touch elements. Elements have sharp surfaces).
5. Vacuum or blow air inside fan area without touching the elements.
6. Carefully wipe off the fan blade without damaging or bending it.
7. Replace diffuser grill and secure with screws.
8. Re-connect power cord to power supply.